PENGSHUN Showcased
Dongguan pengshun electromechanical Co., Ltd
Contact: Mr Ren
Mobile: 13688997595
E-mail:daniel@m.rgmsii.cn
Contact: Miss Yu
Mobile: 13590359548
Tel: 0769-82581698
Fax: 0769-82583077
E-mail:carrie@dgpenshun.com
Address: Room 101, Building 2, No. 14 Xinhe Shengfeng Road, Wanjiang Street, Dongguan City, Guangdong Province
At present, titanium alloy parts are widely used in many industries.As for the processing effect of titanium alloy parts, for those who are not familiar with it, they will pay special attention to it.Let's share it with you:
1.Characteristics of processing titanium alloy materials: in order to better control product quality, first of all, it is necessary to control the cutting parameters of titanium alloy parts,understand and master the machining characteristics of materials.From the relatively precious titanium alloy materials, we through the analysis of the characteristics of titanium alloy, programming the correct scientific processing technology, better reduce the cost and improve the production efficiency.Titanium alloy material density is small,machining ratio is high,high temperature resistance, mechanical processing oxidation resistance.
2.Problems such as sticking knife, burning knife and breaking knife often occur in the machining process of titanium alloy precision parts,resulting in titanium alloy parts were gnawed, out of tolerance or scrap.In order to solve this kind of problem,we need to analyze the characteristics of titanium alloy materials, machining and cutting characteristics, tool and material selection, milling processing characteristics, coolant and other aspects to improve the pass rate of titanium alloy parts, so as to control the product quality of the parts.
3.At present, the processing of imported titanium alloy parts is a technology of digital sequence control by computer.This technique USES a computer to perform logical control over the movement of the device and the operation of the peripherals according to the control sequence stored in advance.
4.Because the computer replaces the original hardware logic circuit of the numerical control device,so that the storage, processing, operation, logical judgment and other control functions of input operation instructions can be completed by computer software,the generated micro instructions are transmitted to the servo drive device to drive the motor or hydraulic actuator to drive the device.
The above about titanium alloy parts processing we share the problem here, I hope the above knowledge can bring help for you.
If you have the mechanical processing demand, pls call us for consultation.